bike ahead composites BITURBO X 32 SAFEWING Front Wheel - 32'' | Carbon | Clincher | 6-Bolt | 15x110mm Boost

Everyone’s talking about 32 inches - and bike ahead composites has the perfect wheel to match the trend.

The BITURBO X 32 SAFEWING perfectly harnesses the advantages of the larger wheel diameter thanks to its special design. The 32-inch version of the proven BITURBO wheel isn’t just larger in diameter - it’s been fully optimized for the new size. It features a special carbon layup that combines lateral stiffness with comfort. Pedaling power is converted into forward momentum without compromise, while road bumps are filtered out. Another particularity is the patented SAFEWING rim design. This ensures perfect tire support and protects the tire carcass from damage in the event of punctures thanks to its rounded rim flanges. The SAFEWING design allows for riding with lower tire pressure, which increases grip and safety.

Since the BITURBO wheel is not under tension when at rest due to its monocoque construction, the rim area can be built approximately 30 percent lighter compared to spoked wheels - without compromising strength. This guarantees top-notch acceleration. Traditional rims are subjected to enormous spoke tension and must be reinforced accordingly.

The BITURBO X 32 SAFEWING is the result of intensive development work. As early as the summer of 2025, bike ahead composites began to explore the 32-inch concept in depth. Initially out of pure curiosity, but after initial tests with a specially built experimental prototype bicycle, they became convinced of its merits. Rolling performance and grip were noticeably better than with 29-inch bicycles. At least, that was the test riders’ impression. To obtain precise figures on the difference between 29- and 32-inch bicycles, they conducted a comprehensive study in collaboration with the test specialists at Ride Better Bikes. The experimental prototype allowed for a perfect comparison: one identical bicycle, two wheel sizes. Even the tire model was the same: the Maxxis Aspen 29x2.4 and the Maxxis Aspen 32x2.4 were used.

During the test, acceleration values were measured on a dynamometer, and differences in comfort were determined on a bumpy track using acceleration sensors. The subsequent test on a race course divided into segments yielded interesting findings. The poorer acceleration of 32-inch wheels is nearly offset by the added grip on uphills. On downhill trails, the larger wheels proved superior. The hardtail was significantly faster with 32-inch wheels than with the 29-inch setup. It was in a neck-and-neck race with the 29-inch race full-suspension bike, which served as the reference model throughout all tests.

As a manufacturer, bike ahead composites can react quickly to trends. Every step takes place under one roof, from development to 3D printing, prototyping, and production. That’s why the BITURBO X 32 SAFEWING was able to reach production readiness in such a short time.

Technical details of the bike ahead composites BITURBO X 32 SAFEWING front wheel

• Six-spoke monocoque construction: Manufactured in a single piece
• Lightweight, laterally stiff, comfortable. No tension when at rest, which is why the rim area is about 30 percent lighter than that of classic spoked wheels
• Rim with patented SAFEWING design: The flat profile with rounded shoulders provides perfect support for the tires and protects the carcass from damage in the event of a puncture
• High comfort factor: The special carbon layup guarantees good lateral stiffness. At the same time, the rim filters out road shocks
• Special hubs with DT Swiss technology
• Axle standards: Front wheel: 15x110 mm
• True carbon look: The unpainted, scratch-resistant surface saves weight and provides an elegant, shimmering look
• Maximum rider weight: 115 kilograms (rider and luggage) - ASTM3

Scope of delivery:

• bike ahead composites BITURBO X 32 SAFEWING front wheel
• tubeless valve