Optimize Ultrasonic Cleaning Fluid - 500 ml

The perfect addition to your ultrasonic cleaner

Optimize ultrasonic cleaning fluid was specially developed for cleaning and preparing bicycle chains in an ultrasonic bath.

It enhances the ultrasonic effect, improves cavitation, and reliably removes manufacturing residues, old wax, oil films, and dirt particles. The result is a chain that’s clean right down to the pores—the ideal foundation for a subsequent waxing treatment.

Features

• Specially developed for use in an ultrasonic cleaner
• Enhances cleaning performance through improved cavitation
• Suitable for cleaning and degreasing bicycle chains
• Removes manufacturing residues, dirt, oil films, and old chain wax
• Ideal for preparing new chains before the first waxing
• Perfect for preparing chains that have already been waxed before the next waxing bath
• Compatible with all common chain coatings
• Can be reused multiple times without any noticeable loss of performance
• Environmentally friendly formulation

Benefits

• Enables particularly thorough cleaning, even in hard-to-reach areas
• Supports the physical effect of ultrasound
• Creates optimal conditions for a long-lasting and clean wax coating
• Can be used for multiple cleaning cycles
• Easy dosing thanks to flexible mixing ratios

Application

1. Mix the cleaning fluid with water in a ratio of 1:10 to 1:20.
2. Pour the mixture into the ultrasonic bath.
3. Place the chain or component in the ultrasonic bath.
4. Run the cleaning cycle.
5. After cleaning, rinse the component with clean water and let it dry completely.

Technical Specifications

• Product type: Ultrasonic cleaning concentrate
• Mixing ratio: 1:10 to 1:20 with water
• Applications: Bicycle chains and drivetrain components
• Compatibility: Suitable for all chain coatings
• Usage: Specifically developed for ultrasonic cleaners
• Reusable: Yes, for multiple cleaning cycles
• Environmentally friendly formulation

Important Notes

• Does not replace pre-degreasing of heavily oiled or greased chains.
• New or heavily soiled chains should be pretreated with a suitable degreaser (e.g., Chain Degreaser Plus or Nitro Thinner) before ultrasonic cleaning.
• The cleaning solution serves as a supplementary cleaning step to ensure maximum cleanliness before waxing.
• The solution can be reused multiple times until cleaning performance visibly decreases or heavy soiling is present.

scope of delivery

• 1 x Optimize ultrasonic cleaning solution in the selected size