Park Tool VP-1 Patch Kit

Ingredients

Solvent naphtha (petroleum), light aliphatic (CAS 64742-89-8), n-heptane (CAS 142-82-5)

Instructions for use

Avoid contact with skin, eyes, and clothing. Absorb spilled product with absorbent material and thoroughly clean the area.
Be aware of the risk of flashback. Even empty containers can pose a fire and explosion hazard.
Do not allow contact with oxidizing agents and store separately from them.
Store in a dry, cool place and do not store with food.
Do not allow the product to enter waterways, the sewer system, basements, or groundwater.

Safety Instructions
Wash face, hands, and exposed skin thoroughly after use.
Avoid inhaling dust, smoke, gas, mist, vapor, or aerosol.
Use only outdoors or in well-ventilated areas.
Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke.
Keep container tightly closed.
Ground the container and the equipment to be filled.
Use explosion-proof electrical, ventilation, and lighting equipment.
Use low-spark tools.
Take measures to prevent electrostatic discharges.
Wear protective gloves, protective clothing, eye protection, and face protection.
Keep cool.
Special treatment (see supplementary first-aid instructions on this label).
If skin irritation occurs: Seek medical advice/medical attention.
IF ON SKIN (or hair): Immediately remove all contaminated clothing. Wash skin with water or take a shower.
Wash contaminated clothing before wearing it again.
IF INHALED: Move the person to fresh air and ensure unobstructed breathing.
If you feel unwell, call a POISON CONTROL CENTER or a doctor.
IF SWALLOWED: Call a POISON CONTROL CENTER or a doctor immediately.
DO NOT induce vomiting.
In case of fire: Use carbon dioxide, dry chemical, or foam to extinguish.
Keep locked up.
Store in a well-ventilated area. Keep container tightly closed.
Dispose of content/container at an authorized waste disposal facility.