More than 800 brands
800.000 active customers
DT-Swiss

DT Swiss X 1900 SPLINE Wheelset - 29" | 25mm | Clincher | Centerlock / 6-Bolt - 15x100mm | 12x142mm

DT Swiss X 1900 SPLINE Wheelset - 29" | 25mm | Clincher | Centerlock / 6-Bolt - 15x100mm | 12x142mm

 

The start in the XC world!

With the DT Swiss X 1900 SPLINE wheelset, the entry into the next Cross Country adventure is as easy as never before. The heart of each wheel is the 25 mm wide X 432 rim.

The narrow design makes the rim not only lighter than a comparable aluminum model with 30 mm internal width, but also ensures sufficient support for modern tires and driving with low air pressure, as the rolling resistance is reduced. In addition, the low weight is crucial for acceleration, as turning and acceleration mass can also be kept lower.

In conjunction with the proven 370 hub and the carefully hand-inserted, torsionally stiff Champion steel spokes, the X 1900 SPLINE wheel offers the necessary reliability for any riding situation – whether it is to drive the sweat on the forehead of the opponents or to beat your own QOM or KOM record.

Technical details of the DT Swiss X1900 SPLINE wheelset

  • rims: DT Swiss X 432 (aluminum)
  • tire type: clincher, Tubeless compatible (TC)
  • construction: Hooked / Crotchet, Sleeve Joint
  • wheel size: 29 inch (700C)
  • outer width: 29 mm / inner width: 25 mm / profile height: 19.5 mm
  • hubs: DT Swiss X 1900 SPLINE 370
  • brake disc mount: Centerlock
  • freewheel: DT Swiss Ratchet LN (18 teeth / 20º engagement angle)
  • freewheel body: Shimano Forged (ASF) / SRAM XD MTB (ASRAM)
  • installation dimension: 15 x 100 mm / 12 x 142 mm (thru axle)
  • spokes: DT Swiss Champion (Straightpull; 2.0 mm)
  • spoke count: 28
  • spoke pattern: triple crossed (both sides)
  • nipples: DT Swiss Squorx (ProLock / ProHead; aluminum; 2.0 x 15 mm)
  • weight (manufacturer's specification):
    front wheel: approx. 865 g
    rear wheel: approx. 1002 / 979 g (HG / XD)
  • max. system weight: 110 kg

Legendary reliability | The wheels of the 1900 SPLINE (Straight Pull Line) series represent the entry into the MTB range of DT Swiss and are intended to equip bikers with components on which they can rely 100 %. Thanks to manual work, not only a precise manufacturing quality is achieved, but also the well-known, brand-typical reliability is ensured.

Tubeless Ready | Tubeless tires offer some decisive advantages over the conventional combination of tire and tube. The tire can be ridden with less pressure without risking "snakebites" and thus offers more grip. The lower pressure also provides a more comfortable ride. The absence of the tube means that there is no friction between the tube and tire and therefore rolling resistance is lower when riding off-road and over obstacles.

Ratchet freewheel system | The special feature of the patented freewheel system is that all teeth of the two installed ratchet pulleys always mesh simultaneously. Compared to pawl freewheel hubs, where the engagement surface is comparatively small, the loads are distributed evenly over a large contact surface by including the entire face surfaces. The result is lower point loading and thus significantly higher reliability.

Pro Lock technology | The DT Pro Lock spoke nipples prevent an independent loosening of the spoke-nipple connection. A patented two-component adhesive is injected into the nipple thread, which allows the construction of extremely durable wheels. Once the nipples are screwed in, the adhesive is activated and then fully cures. Repeated re-centering is possible without any problems, although the adhesive strength decreases slightly with each re-centering.

Scope of supply:

  • front wheel + rear wheel
  • Tubeless rim tape (27 mm)
  • Tubeless valves (MTB, 32 mm)
  • IS adapters (6-bolt)

Fact Sheet of DT Swiss X 1900 SPLINE Wheelset - 29" | 25mm | Clincher | Centerlock / 6-Bolt - 15x100mm | 12x142mm

Product Name: DT Swiss X 1900 SPLINE Wheelset - 29" | 25mm | Clincher | Centerlock / 6-Bolt - 15x100mm | 12x142mm
Manufacturer: DT Swiss
Item Code: DTS626797
activity: Cycling
material: Aluminium
usage bikesport: MTB, Cross Country
hubs: DT Swiss X1900 SPLINE 370
spokes: DT Swiss Champion (Straightpull)
rims: DT Swiss X432 (Hooked/Crotchet | Sleeve Joint)
shifting system: 8-speed, 9-speed, 10-speed, 11-speed, 12-speed
wheel size: 28" (29") (622mm)
ASTM: Category 3
axle standard: 15x100mm (FW), 12x142mm (RW)
Wheel / Hub version: Wheelset, Wheelset > 1700g, Standard Wheel
Freehub Body: HG M (Shimano 8-10s, MTB 11s), XD (SRAM 11/12s MTB)
braking system: 6-Hole Disc, Centerlock/AFS
tire type: Wire Bead Tire, Folding Tire, Tubeless Ready
ETRTO: 25-622
rim width: 29mm
inner profile width: 25mm
rim profile height: 19.5mm
weight limit: 110kg
nipples: DT Swiss Squorx (ProHead | ProLock)
freehub system: DT Swiss Ratchet LN 18
Model year: 2022
Color: Black
weight: 1844g
manufacturer item code: W0X1900AEIXSA18970 + W0X1900NEDLSA18971 (HG) / W0X1900NEDRSA20529 (XD)
Number of Spoke Holes: 28
Weight Source: Manufacturer
Weighed Version: XD
Freewheel System: Ratchet
Manufacturer page: http://www.dtswiss.com