Wera Safe-Torque A 2 - Torque Wrench 1/4" Hexagon, 2-12Nm

Once the set torque value has been reached, the Wera Safe-Torque A 2 torque wrench cannot be overtightened, thus preventing the application of excessive torque. The setting range of 2 to 12 Nm is designed for controlled right-hand and left-hand tightening. Setting and securing the preset value is simple: the audible and tactile engagement when the scale values are reached additionally facilitates the safe setting of the desired torque value. With the Torque Lock function for use as a standard ratchet without torque function, use for rotation angle applications is also possible. The return angle is only 5°, allowing the ratchet to be used in tight working situations.

Features of the Wera Safe-Torque A 2 - Torque Wrench 1/4" Hex, 2-12Nm

• Slip over release mechanism - so the set torque value can never be exceeded
• Torque Lock function: the torque function can be switched off - tool can therefore also be used as a standard ratchet with high loosening torques and in defined rotation angle applications
• For controlled right and left tightening - tightening and loosening with and without torque
• Simple setting and securing of the desired torque value with audible and tactile engagement when the scale values are reached
• Only 30° disengagement angle after reaching target torque value
• Thanks to the fine toothing with 72 teeth, a low return angle of 5° is possible
• 1/4" hex drive for the use of 1/4" bits