Praxis Works eRing Chainring - MTB | 104 BCD | Narrow Wide | 10/11/12-Speed - 32 Sprockets

The MTN e-Rings specifically for e-bikes are cold forged from case-hardened, burnished stainless steel. which significantly increases the service life. The MTN e-chainring has an internal thread for an M8 chainring bolt. The M8 CR screw is screwed directly into the 104BCD ring to ensure a better engine gap. Each individual tooth was formed here very complex to control the chains in the best possible way and to prevent throw-offs.

Technical details of the Praxis Works MTB 104BCD eRing

• Black oxide coating for increased durability
• Case hardened cold forged stainless steel
• SHIMANO - Compatible with mechanical & Di2 10/11/12 Sp.
• SRAM - Compatible with mechanical & wireless SRAM 10/11/12 Sp.
• Gearing 32 Sprockets

Note: The rear derailleur should be a "clutch" model, eg: Shimano Shadow or SRAM Type 2. For very hard terrain or for pure safety, a chain guide is recommended.

Scope of delivery

• MTB eRing chainring 104BCD