Wera Tool-Check Modular Micro 1 Tool Set - 21 Pcs.

Very compact 21-piece tool set for precision mechanical couplings.

The Kraftform Micro 1014 hand tool holder is suitable for holding bits with 4 mm hexagon drive. The 20 bits supplied with 4 mm hexagon drive are suitable for Phillips and Pozidriv screws, TORX®, hexagon socket and slotted screws. They are tough and hard for universal use.

The Tool-Check Modular system offers the option of combining Tool-Check Modular products with each other in a super-compact way, depending on requirements. This requires the rigid adapter 9549 (included) or the flexible hinge 9550 (available separately). The Tool-Check Modular products can be combined, exchanged or extended at any time.

Features of the Wera Tool-Check Modular Micro 1 tool set:

• Tool-Check Modular: individual combination of different Tool-Check Modular components
• Very compact 21-piece tool set for precision mechanical couplings
• Bitholding screwdriver for bits with 4 mm external hexagon drive
• Multi-component Kraftform Micro handle with anti-roll feature and rotating cap
• Power zone with integrated soft zones for transmission of high tightening and loosening moments
• The rotating cap and the fast rotating zone below the cap allow for lightning-fast turning
• Precision zone directly above the screwdriver blade to get a good feeling of the correct rotation angle whilst adjusting
• 20 bits (4 mm external hexagon drive) for Phillips-head (Phillips and Pozidriv), TORX®, hexagonal socket and slotted

Scope of delivery of the Wera Tool-Check Modular Micro 1 tool set:

1 x 1014 Kraftform Micro Bits Hand Holder, 4 x 80mm

4 x 851/0 Micro bits for Phillips recess screws (PH 000 x 30 mm, PH 00 x 30 mm, PH 0x30 mm, PH 1 x 30 mm)

2 x 855/0 Micro bits suitable for Pozidriv screws (PZ 0 x 30 mm, PZ 1 x 30 mm)

6 x 867/0 Micro bits for internal TORX® screws (TX 3+4+5+6+8+10 x 30 mm)

5 x 840/0 Micro bits Hex-Plus for hexagon socket screws (0.9+1.3+1.5+2+2.5 x 30 mm)

3 x 800/0 Micro bits for slotted screws (0.3+0.4+0.5 x 30 mm)

1 x 9549 Adapter for Tool-Check Modular (10.5 x 47 x 16.5 mm)