Loctite Retaining Compound Typ 648 - 10ml

High-strength, low-viscosity bonding – high temperature resistance

When you’re working with holding gears and sprockets on gearbox shafts, or rotors on electric motor shafts, LOCTITE® 648 is ideal for preventing loosening and leakage due to shock and vibration.

This green, low-viscosity, high-strength, anaerobic-curing retaining compound provides reliable bonds on cylindrical assemblies, even when exposed to high-temperature environments.

It cures on active metals (e.g. mild steel) as well as passive substrates like stainless steel and plated surfaces, and it even tolerates minor surface contamination from oils such as cutting, lubrication, anti-corrosion and protection fluids, without the use of a primer or cleaner.

Features

• Works on active and passive substrates without primer
• High strength and oil resistance
• Temperature-resistant up to 180°C (355°F)
• Fluorescent under UV for quality control
• Low viscosity

Technical Specification

• Agency approvals / certificates / specifications: DVGW (EN 751-1): NG 5146C00236; NSF P1 Reg. No 148350; WRAS (BS 6920): 0808532
• Color: Green
• Fixture time: 3min
• Gap fill: 0.15 mm
• Key characteristics: Oil tolerant; Strength: high strength; Temperature resistant
• Operating temperature: -55.0 °C - 180.0 °C (-65.0 °F - 355.0 °F)
• Recommended for use with: Metal: steel
• Shear strength, Steel:  
  27.0 N/mm² (3900.0 psi)
• Viscosity: 500.0 mPa·s (cP)