FOX 38 Suspension Fork - Factory | Float | FIT4 - 29″ | 170mm | 15x110mm - Special Offer

Special offer - Supplied in workshop packaging without additional accessories.

38 – The Hard-Hitting Long-Travel Enduro Specialist

Welcome to the Big Time. If the drops need to be high and the jumps long, then the 38 from FOX is the instrument of choice. Optimized for long travel from 160 to 180 mm, this Single Crown suspension fork sets standards in terms of confidence, performance and durability.

As a representative of the Factory series, this fork with the proven FLOAT air suspension is of course also packed with functions. On the technical side, the Gravity-focused FIT4 damping stands out in particular, which generates maximum traction and thus creates the necessary confidence for racing. While the shape of the arch and fork legs skillfully increases strength with minimal use of material, the lowers impress with clever detail solutions. Both the "Bypass" channels and the special bleed valves are dedicated to pressure regulation in order to exploit the maximum suspension travel potential on the one hand and to optimize the fork's response on the other. With its smooth and extremely durable Kashima coating, the 38 fork is also visually impressive.

Technical details of the FOX 38 suspension fork

• series: Factory
• suspension: FLOAT
• damping: FIT4
• steerer : 1 1/8" - 1 1/2" diameter (Tapered)
• stanchions: 38mm diameter, with Kashima coating
• Ø 58mm crown (E-Bike optimized)
• installation dimension: 15x110mm Boost (Kabolt X thru axle)

FIT4 | 3-Position adjust; Open - Medium - Firm

Lower Leg Arch | The disciplines from All Mountain to Enduro to Gravity place special demands on a modern suspension fork. In order to meet these requirements, the arch and lowers feature a design that saves every superfluous gram without compromising on stiffness and stability.

Lower Leg Bypass Channels | When the fork compresses, the air pressure increases, which can result in the fork not reaching its full travel. Channels in the lower tubes solve this problem by significantly increasing the air volume. This not only reduces the occurrence of unwanted pressure increases, but also allows the oil to circulate to the upper areas of the lowers, keeping the inner seals and bushings lubricated at all times.

Lower Leg Bleeders | To further improve sensitivity and responsiveness to small bumps, the lowers have vent valves in addition to the "Bypass" channels, which allow the atmospheric pressure to be equalized at the touch of a button.

Kabolt X | This floating Bolt-On thru axle with one-sided Pinch-Axle construction not only saves weight at every conceivable point, but also improves torsional rigidity. In addition, the chassis alignment avoids unwanted friction between the upper and lower fork legs for smoother suspension movement across the entire range of travel.