Hebie Swap Mix 724 Clip-On Mudguard 26 Inches - 29 Inches

The seatpost plate with 3 interchangeable foils. The seat post mount is screwed to the seat post via four screws visually inconspicuous and provides a firm hold. The quick-release function on the holder allows quick removal of the holder and the fender. The films are attached and detached via an intelligent closure on the underside of the mudguard via detents.

Features of the Hebie Swap Mix 724 Clip-On Mudguard 26 inch - 29 inch

• Seat post attachment + holder + 3 foils
• Quick-release function on the holder
• Quick, tool-free exchange of the foils
• Foils can be bent to different degrees as desired
• length: approx. 57cm / width: approx. 130mm
• suitable for V-brakes

Mounting instructions for the Hebie Swap Mix 724 Clip-On mudguard

Notes on mounting

• The distance between mudguard and tire should not be less than 6 mm
• Before each ride mudguard check for tight fit and tighten if necessary
• When mounting the seat post, clean it (free of grease)

Scope of delivery

• Swap Mix 724 Clip-On mudguard
• Qick-Release fastening
• 3 foils