DT Swiss 350 Front Hub - Road | Straightpull | Non Disc - QR 100

DT Swiss 350 – Less weight, same reliability

Reliable independence. The revised 350 Road hub is a reliable partner for every adventure, whether on asphalt or gravel roads. While a weight reduction of 10 % could be achieved in the Straightpull version compared to the previous model, it is the sophisticated bearing concept that ensures the legendary reliability for which DT Swiss is known.

Lighter than ever before. Responsible for the weight savings are the lightweight axle in combination with a milled hub body, which adopts the graphic design of the current 350 MTB hubs.

Maximum versatility. Another stroke of genius are optimized end caps, whose design not only provides a better grip, but also simplifies disassembly in the spirit of the "No-Tool Concept". The tool-free plug-in solution allows the conversion in seconds to another installation standard.

Technical details of the DT Swiss 350 front hub

• range of use: Road Bike, Gravel
• spoke mount: Straightpull
• braking system: Non-Disc (suitable for use with rim brakes)
• installation dimension: 9 x 100 mm (quick release)
• weight: approx. 106 g (manufacturer's specification)

Hub bearing technology | To achieve the best possible rotating properties with minimum friction, the bearings of DT Swiss hubs are subjected to an initial preload. When installed in the frame or fork, this is counteracted by the clamping force of the wheel mounting system. The calculation of these lateral forces in combination with the correct bearing tension allows the construction of a durable as well as backlash-free hub.