Wera Safe-Torque A 1 - Torque Wrench 1/4" Square, 2-12Nm

Once the set torque value has been reached, the tool cannot be overtightened, thus preventing the application of excessive torque. Adjustment range from 2 to 12 Nm for controlled right-hand and left-hand tightening. Easy setting and securing of the preset value: the audible and tactile engagement when the scale values are reached additionally facilitates the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function. The return angle is only 5°, so that the ratchet can also be used in tight working situations. Can therefore also be used for turning angle applications.

Features of the Wera Safe-Torque A 1 - Torque wrench 1/4" square, 2-12Nm

• Slip over release mechanism - so the set torque value can never be overdone
• Torque Lock function: the torque function can be switched off - tool can therefore also be used as a standard ratchet with high loosening torques and in defined rotation angle applications
• For controlled right and left tightening - tightening and loosening with and without torque
• Simple setting and securing of the desired torque value with audible and tactile engagement when the scale values are reached
• Only 30° disengagement angle after reaching target torque value
• Thanks to the fine toothing with 72 teeth, a low return angle of 5° is possible
• 1/4" square drive with nut locking mechanism