Wechsel Charger 3 Tent - Oak

The dome tent belongs to the category of 3-person tents that cost little but can do a lot. With a sleeping area of 220 x 170 cm (length x width) and a comfortable seat height of 110 cm, the CHARGER 3 weighs just 3.2 kg. Two vestibules with a depth of 90 cm offer sufficient storage space. The stability of the tent construction is based on the specially developed pole connection knots. The inner tent is completely free-standing and can be easily moved after pitching. Together with the groundsheet, the outer tent can also be used without the inner tent - as particularly lightweight weather protection for summer temperatures. Large mosquito nets in the inner tent ensure good ventilation.

Features of the Wechsel Charger 3 tent:

• All-round tent
• Good price-performance ratio
• Large amount of space
• Freestanding inner tent

Tent specifications

• Flysheet: Ripstop polyester 68D, PU coated, 5,000 mm WS, 2.5 kg tear strength
• Inner tent: Polyester 70D, 185T, water-repellent, breathable
• Floor: Polyester 75D, 210T, PU coated, 7,000 mm WS
• Mosquito net: Polyester 50 D, NoSeeUm
• Poles: Aluminum 7001 T6, bolt tip
• Pegs: Solid pin peg (aluminum)

Travel Line

Are you looking for a tent that will accompany you to the lake, the beach or the mountains? You don't have to pay attention to every gram because you're traveling by bike, car or motorcycle? Do you value good workmanship, functional details and a high level of comfort? Then you should choose one of the Travel Line products from Wechsel. Because all models in this line meet the requirements of everyone from weekend campers to ambitious trekkers. Whether tunnel tent or geodesic, the 1 to 5 person tents in the Travel Line have practical entrances, comfortable sleeping lengths and plenty of storage space.

Reinforced guy points (Power Triangle)
All fastening points on the flysheet are reinforced with Power Triangles. Reinforcing the stress points is particularly helpful with the strong, less flexible polyester fabric with additional PU coating. This means that the force is not applied at specific points, but is distributed over a larger area.

Guy lines with Guyline flag
The guylines are reflective. They can be adjusted using the linelock and the guyline flags ensure that the lines are clearly visible and always tidy.

APEX ventilation flaps
The APEX ventilation flaps are located at the apex of the incoming wind. Here, the wind creates an overpressure on the side facing it and at the same time a negative pressure on the other side. In addition, the APEX ventilation flaps are incorporated into the design seams. They do not need to be tensioned and lie flat when closed thanks to the Velcro tape. This prevents annoying flapping in the wind.

Color-coded poles
The pole end tips and the corresponding pole channel inlets are color-coded. The color coding enables quick and easy assembly.

Rectangular cut inner tents
The tunnel tents have a rectangular cut and do not taper at the foot end. A rectangular floor plan is particularly practical for thick sleeping mats so that the mats do not overlap at the foot end.

Double loops
Double loops allow two different tensioning options

Mosquito net and inner tent
The inner tent is made of a breathable and water-repellent fabric that prevents condensation from penetrating the inside of the tent and allows it to roll off the outside of the inner tent. The vents equipped with mosquito nets are located in the upper half of the inner tent. This ensures a good exchange of air without creating an unpleasant draught in the tent.

Connection inner tent - outer tent
The connection between the inner and outer tent is practical and sustainable. The elastic can be knotted tighter or easily replaced if necessary.