Finish Line HALO Hot Wax Chain Lubricant - 600 g

HALO™ Hot Wax chain lubricant is engineered to dramatically improve drivetrain performance in both dry and wet conditions by: 1. Significantly reducing the attraction of abrasive contaminants. 2. Delivering an unrivaled level of reduced drivetrain friction. 3. Ensuring extreme mileage between re-lubrication intervals. 

Three elite grade ingredients deliver superior results: 

Highly Refined Paraffin 

creates a robust, dry-to-the-touch coating that repels water, sheds friction-causing abrasive contaminants and virtually eliminates chain stains. 

Spherical Tungsten 

features a proprietary hollow core to reduce vibrational friction caused by high torque pedaling. Micron-size and spherical shape helps reduce sliding friction by creating a rolling effect on the surface of the chain. 

Ceramic boron nitride platelets

cover the chain to form a protective non-stick coating. This ceramic coating works synergistically with spherical tungsten to reduce wear and help extend the life of expensive drivetrain components. 

Instructions: 

1. Locate your master link to quickly and easily remove chain (master link pliers required). Completely clean and dry chain before first application.
2. To melt wax pellets, place the HALO™ bag in a pot of water and bring the water to a gentle boil. Alternatively, pour pellets into a slow cooker to melt the wax. 
3. Secure chain on the Immersion Tool provided in bag. Scan QR code for best technique. 
4. Once the wax pellets are fully melted, remove bag and set on covered work surface.
5. Use Immersion Tool to submerge chain into the melted wax. 
6. Leave chain in the wax for at least 3 minutes to ensure full penetration into chain bushings.
7. Remove chain from hot wax and hang until fully dry (approximately 30 minutes). Note: Some wax will drip from the chain.
8. Once dry, manipulate chain before reattaching chain to your bike. Note: It is normal for excess wax to flake off.

Best Practices:

Keep maximum temperature below 220°F (104°C). Do not use oven or microwave to melt wax. Avoid exposure to open flame. Wear gloves and eyewear. If old wax needs to be stripped off chain, use boiling water to remove.