Praxis Works M30-Thru T47 Ceramic Bottom Bracket Internal - T47-85.5/89.5-M30-Thru

The Praxis Works bottom bracket has a housing made from heat-treated and forged aluminum and is suitable for both MTBs and road bikes. It is compatible with T47 frames and various cranksets with a continuous 30mm spindles. The sealed bearing ensures durability and low-friction running.

Technical details of the Praxis Works M30-Thru - T47 I.B. bottom bracket

• Area of application: Road bike, MTB
• Material: forged aluminum (housing), steel (cartridge bearing)
• Bottom bracket: T47 I.B. (internal)
• Housing width: 85.5mm - 89.5mm
• Axle profile of the crank: M30-Thru (30mm/30mm)
• Ceramic industrial bearings Grade 5 / ABEC 5

For example compatible with:

• RaceFace/Easton Cinch
• CaneCreek
• Rotor Rex/3D+

Note from the manufacturer

Refer to the manufacturer's instructions supplied with the crank model to determine the correct setup. Praxis supplies 2mm dust caps for each side as a basic setup, but each brand has its own specific crank setup. Depending on the crank, additional spacers may be needed.

Recommended tool:

• Praxis Works M30 BB Tool (TP-3028)
• 3/8 inch torque wrench or the M30 BB Tool (TP-0330)

Scope of delivery

Bottom bracket consisting of housing with cartridge bearing, spacer sleeve and 2 dust caps