LOOK Keo Blade Ceramic Pedal 12 Nm Vision - black

Visible. At all times.

LOOK Keo Blade Ceramic Vision pedals increase safety with their integrated lighting, which is visible to other road users from up to 1 km away, day or night. They are fully integrated, easily removable, rechargeable, and offer the world-class performance of ceramic pedals. 

The Keo Blade Ceramic pedal offers an ideal balance between lightness and durability to reliably accompany ambitious cyclists. Equipped with a chromium-molybdenum axle and ceramic bearings, it integrates LOOK's patented Blade technology into an aerodynamically optimized carbon pedal body. This pedal not only offers lightness, stability, and durability, but also a generous contact surface for maximum power transfer with every pedal stroke. Designed to maximize performance on the road, it ensures intuitive clipping in and out, secure hold, comfort, and unwavering efficiency.

Features of the Look Keo Blade Ceramic Vision pedals:

• Pedal body material: carbon
• Axle material: CrMo steel
• Bearing material: Ceramic
• Pedal + cleat height: 14.8 mm
• Contact width: 64 mm
• Contact surface: 705 mm²
• Release tension: 12 Nm
• Q-factor: 53 mm
• Weight: 135 g per pedal (manufacturer information)
• Range of motion: 0°, 4.5°, or 9° depending on the type of plate (black, gray, or red)

Increased comfort

The Keo Blade Ceramic offers a generous contact area of 705 mm² and a width of 64 mm, which ensures even pressure distribution under the foot during each pedal rotation. This configuration minimizes the risk of "hot spots" or foot discomfort, regardless of the stiffness of your shoes. Thanks to the extended contact surface consisting of three stainless steel plates, the pedal offers additional stability and reduces unwanted movement and lateral tilting when pedaling.

Simplified tension adjustment

Blade technology allows for the adjustment of 4 different tension levels: 08/12/16/20. With just one special tool, the carbon blades can be replaced in less than 30 seconds to individually adjust the desired tension.

Aerodynamic design

The revised design minimizes air resistance at the front and the transition between the shoe and the pedal. The curved lines of the carbon spring are perfectly coordinated, catapulting the Keo Blade Ceramic to the top of its category in terms of aerodynamics. This successful combination of aesthetics and efficiency sets new standards for demanding cyclists.

ceramic bearings

Reducing friction is crucial for increasing speed and minimizing effort. LOOK's ceramic bearings offer perfectly spherical and durable bearings that reduce resistance by 18% and extend service life by 4 to 6 times compared to conventional steel bearings. Every aspect of the pedals is designed to maximize speed and minimize effort on every ride.

Features of Vision lighting:

• Plug and play
• 2 lights from 2-60 lumens
• 4 light modes: Day flash / Night Flash / Power Steady / Steady 
• Up to 40 hours of battery life 
• Beam angle: 180°
• Simultaneous charging of both lights with dual USB-C cable
• Lights removable: YES
• IPX7 – tested for waterproofness 
• Please note: According to StVZO, the lights are not approved for use on German roads

The Keo Blade Ceramic Vision pedals feature 60-lumen rear lights with four modes for safer riding in all conditions. The slim, aerodynamic light weighs only 40 g per pair and offers an impressive battery life of 40 hours. The lights were specially developed for the high-performance Keo Blade Ceramic pedals, which are praised for their maximum power output and minimal air resistance.

These revolutionary 60-lumen lights are visible in daylight from a distance of up to 1 km. Studies have shown that drivers react much sooner, even in bright sunlight, ensuring a safer ride. Through the integration of the lights into the pedals, 180° visibility is achieved, so you're visible from every angle, no matter where your ride takes you. 

The Keo Blade Ceramic Vision pedals adapt to all conditions with four different light modes. During the day, the "Day Flash" mode ensures that drivers notice you immediately with powerful flashes of light. At night, "Night Flash" takes over, with clear pulses ensuring optimal visibility in the dark. For long rides in the dark, "Power Steady" provides a constant and powerful beam of light that reliably illuminates the road. Finally, "Steady Mode" offers a steady light, ideal for dimly lit environments.

Installation and removal couldn't be easier. No tools are required. Thanks to the ingenious "snap and press mechanism," you can install, charge, or replace the pedals in less than three seconds. Speed does not come at the expense of safety, as these lights remain stable even on the roughest terrain.

Scope of delivery: 1 pair of pedals with lighting + Keo Grip cleats (gray)