30-day return policy
800.000 active customers
SRAM

SRAM Force 1 / CX1 Moto DoubleTap Shift-Brake Control + Hydraulic Disc Brake - Flat Mount - Set front+ rear | 1x11-speed

SRAM Force 1 / CX1 Moto DoubleTap Shift-Brake Control + Hydraulic Disc Brake - Flat Mount - Set front+ rear | 1x11-speed

Please note: This is a moto version. This means that the left lever is for the rear brake and the right lever for the front brake.

SRAM Force CX1: One Less Barrier to Cross. The new SRAM Force CX1 groupset is a complete high-performance 1x11 cyclocross drivetrain created by blending the best of SRAM's revolutionary XX1 mountain bike and road technologies. This is a single-ring, 11-speed complete drivetrain that is lighter, simpler, and tougher while offering a clean look and optimal gear selection for cyclocross. SRAM Force CX1 offers better chain management and smooth shifting no matter the conditions or terrain. It is the only true 1x dedicated cyclocross system.

Cyclocross braking has remained in the dark ages. Sure, they're shinier and lighter, but rudimentary. While frame and drive train development has been the stuff of modern space exploration, road braking has languished with the likes of horse shoes an buggy whips. Until now.

SRAM, long a leader in hydraulic braking technology with the Avid brand, has reset the vision for road bike braking for the coming decade. Not unlike every other high speed conveyance, SRAM brings hydraulic technology to road cycling for multiple applications. Disc or rim brake, SRAM will stop what you've propelled, faster and with better modulation. Go ahead and go in deep.

The SRAM Force CX1 ErgoDynamics™ brake lever is bred from the DNA of SRAMs best-in-class SRAM RED, representing SRAM's most advanced thinking on perfecting the interface between cyclocross rider and bike.

SRAM Force 1 / CX1 Moto DoubleTap Shift-Brake Control + Hydraulic Disc Brake - Flat Mount - Set 1x11-speed

  • All new design inside and out
  • Revised ergonomics for better finger wrap and a revised shifter paddle for improved finger clearance
  • Individual Reach Adjust
  • Carbon brake levers/ aluminum shift levers
  • Low hand force required
  • Fully sealed system for no contamination
  • Easy bleed access
  • Optimized stopping power and modulation for cyclocross
  • 18mm front/ 18mm rear pistons
  • Specific caliper and piston ratio
  • 160 or 140 Centerline rotors sold separately
  • Forged aluminum disc caliper with steel-backed organic pads and stainless hardware
  • Now available to fit flat mount frames and forks



DOT 5.1™

Heat is an enemy of any brake system, so advancements in heat management, mean advancements in your ride. You see, SRAM found that in their systems DOT 5.1 takes almost 3 times longer to boil than DOT 4, thus allowing flawless fade-free performance in even more extreme conditions.

DoubleTap

What It Is: DoubleTap® is the flagship technology leading SRAM's road gruppo revolution. It's a simple yet elegant and advanced system that addresses issues - Without compromising on performance, comfort, and weight - with a revolutionary shift/brake lever design.

What It Does: DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.

How It Works: DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever. With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.

Location, Location, Location: DoubleTap's one-motion unidirectional levers (05) work flawlessly no matter what position you're shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.

Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip.

Divide and Conquer: On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally - an unfortunate side effect of other shift/brake lever designs.

What It Means To You: The efficient and ergonomic design reduces weight and eliminates bulk while adding comfort. You can shift from any position on the bars, even while sprinting, giving you a critical advantage over your competition, and our new single-lever mechanism also lets you shift faster, easier, and with more accuracy, without risk of scrubbing speed or losing your grip. DoubleTap® is the cornerstone of SRAM's assault on road biking. It's a new way of shifting - and a new way of thinking - that will put you ahead of the competition, no matter where you find it.

Reach Adjust

Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.

ZeroLoss™

ZeroLoss simply means, well, zero loss-when you push on the lever, for an upshift or down shift, the cable is engaged instantly-zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.
Brake caliper: Flat Mount
Brake fluid: DOT 5.1
Brake hose: front: 950mm <br< rear: 1800mm
Braking pads: metall
Disc: brake discs not included in delivery!
Included in delivery: DoubleTap Hydraulic Shifter Set, shifting cables, brake hoses 950/1800mm, front/rear brake caliper, FW adaptor
without brake discs
Manufacturer item code: 00.5218.006.003
00.7018.148.004
Material: Brake lever: carbon
shift lever / brake caliper: aluminium
hardware: stainless steel
Weight supplement: DoubleTap hydraulic shifters, shifting cables, brake hoses, front/rear brake caliper, FW adaptor)
(weighed by Bike24

Fact Sheet of SRAM Force 1 / CX1 Moto DoubleTap Shift-Brake Control + Hydraulic Disc Brake - Flat Mount - Set front+ rear | 1x11-speed

Product Name: SRAM Force 1 / CX1 Moto DoubleTap Shift-Brake Control + Hydraulic Disc Brake - Flat Mount - Set front+ rear | 1x11-speed
Manufacturer: SRAM
Item Code: SRA270497
activity: Cycling
usage bikesport: Road Bike, Cyclocross
Shifting System (Manufacturer): SRAM
number of gears - front: 1
shifting system: 11-speed
Shifting Actuation: Mechanical
disc brake mount: Flatmount
brake actuation: Hydraulic
brake lever version: Drop bar
brake fluid: DOT 5.1
Disc brake - version: # Front & rear set, Set caliper & lever
Shift lever - Version: Shift-brake-lever, # Pair
Model year: 2023
Color: Black
weight: 709g
Weight Source: Manufacturer
Manufacturer page: www.sram.com