Symbolic picture: For illustrative purposes the product is shown in another color or variation.
ROTOR Q Ring 1-speed, 110x4
Very light, high quality CNC milled 1x (1-speed) Aero chainring for 110x4 hole circle.
Aero-cover is not included.
The ROTOR 110x4 Aero chainrings form a closed surface with the ROTOR INspider (+ Aero cover) or ROTOR MAS 110x4 Spider, so that the air flow does not break off and thus offers an aerodynamic advantage.
Can be combined with ROTOR Direct Mount System:
- ROTOR 2INpower DM Road, INpower DM Road,
ALDHU and VEGAST (30mm aluminium axis), ALDHU 24 (24mm steel axis)
- ROTOR INspider Powermeter 110x4
- ROTOR MAS 110x4 AERO Spider
- ROTOR 110x4 ALDHU Spider
- and 110x4 Shimano cranks
Note: The Aero cover is not included in the scope of delivery and must be ordered separately. Product No.: ROT449147
Improve your pedalling efficiency with oval chainrings
At the point of greatest force output, Q rings have the largest diameter. At the upper and lower dead center the smallest diameter is located, so that e.g. at the mountain the dead center is overcome more easily and this makes a smoother step under load possible.
Using the OCP Direct Mount System, the oval chainrings of ROTOR Direct Mount cranks can be adjusted in up to 20 different OCP positions and thus optimally adapted to the individual pedal position. The ovality of the chainrings is 12.5%.
In exceptional cases, the use of Q rings may cause problems in finding the optimal alignment of the front derailleur bleach.
The new ROTOR Q RING wedge adapter is mounted between the clamp and the front derailleur for better alignment. (ROCKPQADAPTER)
The chainrings can also be mounted on Shimano© 4 arm cranks in the OCP3 position used by most riders.
Note for Shimano cranks
For Shimano cranks the matching covers for a flush transition to the crank are recommended:
- Dura Ace 9100: ROT370732
- Dura Ace 9000: ROT189332
- Ultegra 8000: ROT405920
- Ultegra 6800: ROT246031
