Description of Shimano SLX FD-M677-E Side-Swing Front Derailleur 2x10 - E-Type without BB Plate - black
Cycle where you want, how you want. With the driver tuned SLX, you can cycle on almost any terrain in the way you want. The Dyna-Sys system provides an intuitive gradation for optimum energy transfer. No matter how rough, rocky or muddy terrain is, you benefit from the best stability. SLX allows you and your bike, to become one with the trail.
The narrow cage of the SLX front derailleur offers great shifting performance with less chain attrition. The lower shock protection increases clearance between tire and chain.
Note: Only compatible with 10-speed Dyna-Sys shifting components. For chain stays with an angel from 66-69°. Chain line 48.8mm
Properties of this derailleur
Fitting for shifting: 2x10-speed Mounting: E-Type without BB Plate Construction type: Side-Swing Cable route type: Front Pull
Compatible with the special crankset which chain line is 3mm outboard - for Boost 148 Standard (special frame is required).
Thanks to the Side-Swing technology the shift performance of the front derailleur can be increased by 100 percent. Designed specifically with modern trail bikes in mind it provides 15mm of increased tyre clearance whilst new cable routing dramatically reduces the shifting effort.
Note: Because of the front position of the coiling cable bushing at the front derailleur, the shifting cable must be installed inside or above the down tube.
Side-Swing technology using the example of XTR 9000 front derailleur:
Fact Sheet of Shimano SLX FD-M677-E Side-Swing Front Derailleur 2x10 - E-Type without BB Plate - black
Shimano SLX FD-M677-E Side-Swing Front Derailleur 2x10 - E-Type without BB Plate - black