Syntace W30 MX Boost 29" Wheelset - 6-Bolt - FW: 15x110mm | RW: 12x148mm (X-12)

Our price: Our price:
680,00
Free Shipping1. Price incl. VAT
for shipment to Germany.

Production, delivery time 1-3 weeks **

  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Description of Syntace W30 MX Boost 29" Wheelset - 6-Bolt - FW: 15x110mm | RW: 12x148mm (X-12)

Syntace Boost

With the 148mm/ 110mm boost hubs it`s possible to build up much stronger and stiffer wheels. The distance between the flanges increases from 142mm to 148mm. This innovation is important for 29inch wheels. Comparing to normal hubs the weight of the boost hubs is not essentially higher.

Rear wheel, that is distinctly different where it matters!

The Syntace W30 MX Boost wheel with an external rim width of 30 mm is extremely lightweight. Because light weight tyres with thinner side walls that roll better only really start to show good all-round performance when mounted to wide rims, without reduced puncture resistance.

Configuration: Asymmetrical Syntace W-Series MX rim with custom drilling and spoke angle matched hub flange. 32 butted spokes, triple crossed, Sapim alloy nipples. Hand lacing quality.

Black aluminium instead of carbon: The ductile material aluminium has its rightful place in two finger wide rims rolling over sharp rocks, roots and steps. If it was just possible to make sufficiently lightweight rims. It is possible.

Lightweight and tougher than carbon rims: Thanks to the Syntace precision profile made of a custom high strength alloy, welded and multiply cold worked and heat treated. Stress reducing asymmetrical Syntace W-Series profile design with side step drilling pattern.

360° Syntace ToughSkin: All round, meaning even inside the bead hook, the rims are shot peened for increased surface density. This cold working process of the aluminium not only achieves a measurable increase in material surface hardness but also creates a "grippier" surface at all tire contact areas for the tire to hold onto. This reduces the the likelihood of the tire to move on the rim under large loads, especially when riding with low air pressure. And reduces the likelihood of tearing off a valve.

Recommended range of application: Best handling characteristics combined with fast rolling. Previously unheard combination of fast rolling and traction control for all application from tour to trail up to all mountain. Suitable for rider weight up to 110 kg.

HiTorque MX Hub
One of the toughest hubs on climbs and descents. The heart of the Syntace wheels are the Syntace developed and manufactured Syntace Hi-Torque MX hubs (Pat, pend.). Finest turning and machining craftsmanship, inconspicuous appearance, but with superior inner qualities.

Ratchet freewheel: all or none!
The name and the crisp sound already lead to the presumption: the freewheel mechanism of the Syntace rear hub will withstand more than others. The ratchet mechanism which was further refined, guarantees that all teeth engage simultaneously. The 36 teeth, in Germany precision machined high strength ratchets, are driven by four spiral springs.

Even with icy cold winter temperatures the Syntace Hi-Torque MX shows no engagement denials or signs of "chain-push" issues with consequent chain wrap attacks.
The robust flanges are made of high strength 7075 alloy, feature test machine optimized dimensions and are spoke angle matched.
Its strong heart, the butted 17 mm oversize axle as well as the intelligent bearing positioning provide maximum stiffness and life span at lightest possible weight.

HiTorque MX
  • oversize axles, for maximum stiffness, durability and lowest possible weight
  • Hub body with two double sealed precision cartridge bearings
  • Freewheel with two double sealed precision cartridge bearings
  • Ratchet freewheel with 10° pitch (36 tooth), with reduced 1.5° engagement freeplay. Total engagement angle approx. 11.5°
  • optimized engagement due to four coil springs
  • Disc brake interface: 6-bolt standard
  • MicroAdjust end cap
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Fact Sheet of Syntace W30 MX Boost 29" Wheelset - 6-Bolt - FW: 15x110mm | RW: 12x148mm (X-12)

Product Name: Syntace W30 MX Boost 29" Wheelset - 6-Bolt - FW: 15x110mm | RW: 12x148mm (X-12)
Manufacturer: Syntace
Item Code: SYN291480
Year: 2017
Manufacturer item code: VR:126930 | HR:126558
E.T.R.T.O: 24,5-622
Material: rims, spokes: custom aluminium
hub: 7075 aluminium
Weight: approx. 1750 gram (manufacturer's claim)
Spokes: triple butted, triple crossed, black
highly stressed side: 1.8 mm
less stressed side: 1.5 mm
Spokes number: 32
Nipples: Sapim aluminium double square, black
Rim: W30 MX
Rim width: 24,8 mm (inner)
30 mm (outer)
Hub: HiTorque MX Front 15 front hub
HiTorque MX Rear 12 rear hub
Color: rim/hub: race black
Purpose: MTB, cross country, touring, all mountain
Fitting for shifting: 10/11-speed Shimano / 10-speed SRAM, for XX1 optional available
Freehub: ratchet freehub
Disc brake standard: 6-bolt
Fitting type of tire: clincher, tubeless ready
Fitting tire dimension: 2,2 to 2,35''
Valve hole: 6,0mm Ø (Sclaverand)
Hub axle system: FW: for 15x110 mm Boost thru axle / RW: for 12x148 mm Boost thru axle
Included in delivery: Wheelset without thru axles and rim tapes
Weight limit: 110 kg
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)
Item includes
Production, delivery time 1-3 weeksSyntace W30 MX Boost 29" Rear Wheel - 6-Bolt - 12x148mm (X-12)
Production, delivery time 1-3 weeksSyntace W30 MX Boost 29" Front Wheel - 6-Bolt - 15x110mm
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Average:

(0 Ratings)
Customer Reviews