Wheels Manufacturing Pressfit Bottom Bracket Bearing Kit - Ceramic Hybrid - PF41-71/86/91/92/104/107-30

It doesn't work well with FSA Gossamer Pro 386evo crankset. The silicone seal is too thick and the total width with seals is ~93mm. However, the spindle length of FSA is only ~89.5mm. Moreover, the inner diameter of the bearing is on the small side, which makes the FSA spindle out of the tolerance. I had to use a hammer to smash in/out the spindle. After the installation, it spinned slower with this ceramic BB than with Token 4130 steel, which is in the tolerance and the installation is way easier.
In all, don't but it if you use an FSA 386evo crankset. Maybe it work nicely with other cranksets. The bearing itself is high quality, weighs 64g a pair themself, but that's made by Enduro, not Wheels Manufacturing.