DT Swiss HXC 1200 Spline 29" / 30mm Carbon - Wheelset - 6 Bolt - FW: 15x110mm | RW: 12x148mm Boost

The best of the best for fast eMTB! Where do you start? At the center: A super reliable straightpull hub connected via lightweight eMTB approved spokes to a stiff, precisely built full carbon hookless rim. But the whole HXC 1200 SPLINE really is even greater than the sum of its parts, it is a wheel that accelerates like no other, has traction like no other and is precisely built like no other. Out on the trail it is an absolute blast.

The hookless design allows super-precise construction of the rim for perfect tubeless compatibility. It massively reduces the chance of punctures, is very low in weight and achieves excellent tire support with the 30 mm rim width.
Twenty-nine inch plus wheelset for 15x110mm Boost thru axles at the front and 12x148mm Boost thru axles at the rear. With 6 bolt disc brake mounts.

The wheels of the Hybrid series are especially designed for E-MTB! Their completely reinforced hubs are optimized for highest torques and loads: largely dimensioned bodies with increased wall thickness, high strength axles, large-sized bearings, a steel freehub body, 24T steel ratchet system (rear hub) and rims with enhanced spoke holes. Thanks to a minimal increased weight the maximum system weight could be raised to a new level of remarkable 150 kg (120 kg for HXC). Finally the Hybrid System is completed with super strong straightpull spokes and Pro Lock Squorx Pro Head nipples.

Technologies of DT Swiss HXC 1200 Spline 29"

Carbon
Being a high-tech composite material consisting of fibres and resin, carbon can be used to resist the exact forces it is subjected to. This enables engineers to design parts with an unmatched strength to weight ratio.

Double Butted spokes
These spokes have two different diameters. A section of this spoke is butted through cold forging. This creates a smaller diameter. Therefore, this thinner piece allows reducing the weight while improving ductility.

Boost
Boost compatible hubs have an enhanced flange distance. This has significant advantages: a flatter spoke angle and improved symmetry allow building a stiffer and stronger wheel, always an advantage, but especially for larger diameter wheels in challenging terrain.

SPLINE^® hub shell
The result of precise engineering: A lightweight, aggressive looking hub shell specifically designed for straight pull spoke use.

The maximum recommended system weight is 120 kg.