Tubolito MTB Plus Inner Tube - 27.5" | 2.50-3.00"

Note: The inner tube is supplied in the version ordered. The packaging label may differ from the actual article.

Minimum weight - maximum protection

The Tubo MTB Plus product line is optimized for tire widths from 2.5" to 3.0" - which is today's standard for E-MTBs. The light weight of 105 g (27.5"+) increases your battery life. Also a lightweight alternative for tubeless riders.

Also with the Plus version more than 100 g per impeller can be saved compared to standard butyl tubes, at almost half the size of the pack size. The puncture protection is twice as high as for standard tubes in terms of the penetration maximum protection against a flat tire. The assembly is just as comfortable as with butyl products. Tubolito tubing is a lightweight alternative for tubeless rider.

Designed, developed and made in Europe

Tubolito Tubes made of the high-tech Thermoplast material can resist forces twice as much as standard tubing. The material can be stretched more than four times, giving maximum protection before a flat tire.

Tubolito tubes tried and tested

A 0.75 mm test pin runs with a defined speed through a predrilled hole of the outer tire. Tire pressure is 2.0 bar. The power and the route to the tire pitcher are recorded. Tubolito convinces here clearly: The puncture protection is twice as high as for standard tubes.

Important Note: For disc brake only. Not suitable for rim brakes!
Material: Thermoplast
Valve type: Presta (SV)
Weight supplement: manufacturer's specs