Cyclus Tools Drop Out Alignment Tool - 1 pair

With the drop out alignment tool it is possible to control and correct the geometric position of the drop outs in relation to each other.

Preparation

• Remove the wheel from the frame or fork.

Use

• Tighten the two alignment tools onto the fork or frame.
• Note the different installation widths (front wheel: 100mm or rear wheel 130/135mm)
• To do this, move the spacer sleeves on the control gauge accordingly.
• The dropouts are in the correct position, if the front surfaces are parallel to each other.
• If there are differences on the front surface, you must adjust the dropouts accordingly.