These versions of the Wolf Tooth ReMote allows mounting directly to the brake lever. It is available for Magura, Shimano I-Spec A & B, for Shimano I-Spec II and for SRAM/Avid MatchMaker X brake levers.
The delivery of Magura version is including the mounting hardware.
The delivery of Shimano I-Spec versions is including I-Spec mounting hardware.
The delivery of SRAM/Avid MM version is including a T-Nut and a mounting bolt. The MatchMaker X clamp is not
included and has to be purchased separately.
The engineers of Wolf Tooth Components love their dropper seatposts. But while the posts themselves are better now than ever before, their remotes still leave much to be desired. Building on the award-winning ReMount line, the ReMote solves all common dropper remote complaints in a compact, ergonomic, and sturdy package.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.
- Compatible with all cable actuated dropper post
- works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
A table with compatibility information can be found in the product pictures. If your post is not listed in the chart, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard Remote will work best.
UpFront cable fixing:
The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
Large-diameter ball-bearing pivot:
An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
Integrated cable adjustment:
The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
Breakaway axle pivot:
Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
A machined surface ensures that control is not lost- even in the worst of conditions.
The ReMote has been tested and is recommended for use with many cable-actuated dropper posts.
Included in delivery: 1 remote
Material: 6061 T6 Aluminium, Delrin axle
Weight supplement: Shimano I-Spec A/B)
approx. 33 grams (Shimano I-Spec II)
approx. 42 grams (SRAM/Avid MatchMaker X)