COVID-19: Delivery time3 16 to 19 working days to United States (change country)

Cane Creek Helm Air 29/27.5+ Inch Fork - 140mm - 44mm Offset - Tapered - 15x110mm Boost - gunmetal grey

Our price: Our price:
Price excl. VAT excl. Shipping & Handling
for shipment to United States.

Still 2 in stock

Ships immediately
Delivery time to United States 2-4 weeks

  • Description
  • Fact Sheet
  • Ratings (0)

Description of Cane Creek Helm Air 29/27.5+ Inch Fork - 140mm - 44mm Offset - Tapered - 15x110mm Boost - gunmetal grey

Cane Creek's Helm Air is a high end Trail and Enduro fork with Boost standard and 160 mm travel which can internally be reduced to 100 mm via spacers and in steps of 10 mm. The version with 44 mm offset guarantees at frames with modern geometry and a flatter steering angle nevertheless stable turning behaviour.

The stiff casting allows you to install 29 inch tires with up to 64 mm width and 650B tires with up to 75 mm width. The 35 mm stanchions are made of butted aluminium. In addition, the Cane Creek Helm fork offers a closed damping cartridge with Mono-Tube design and an air damping with independent positive and negative air chambers and a mechanically adjustable negative spring. The adjustment options comprise High-Speed compression, Low-Speed compression and Low-Speed rebound.

Technologies of the Cane Creek Helm Air 29"/27.5"+ fork

AIR Spring Technology - Independent positive and negative air chambers

Give your bike the advantage it has always wanted. Helm’s unique air spring system provides unmatched ride quality, traction, and accessory-free adjustability. The high volume air chambers allow for instantaneous off the top suppleness, superior mid-stroke support and unbelievable tracking. Staying true to Cane Creek’s ideology #EveryRideIsDifferent, their engineering team isolated both the positive and negative air springs; enabling the rider to independently control the air pressures and feel throughout the entire stroke of their fork.

Damper Control

With predictable control as the main goal of any rider's suspension setup, Cane Creek gives riders the ability to take the Helm. With 10 clicks of High-Speed compression, 20 clicks of Low-Speed compression, and 15 clicks of Low-Speed rebound no rock garden is too big or rut too deep. The Helm's damper system is a true closed cartridge mono-tube design, eliminating additional weight, providing excellent actuation, and designed around robust internal seals. Critically tested for the abuse todays top enduro racers consistently dish-out.

D-Loc axle system

Helm's D-Loc axle system is unique to Cane Creek and a critical component for achieving the ride characteristics their engineering and test rider teams demand. Through a key and lock design the D-Loc axle maintains the course ahead while eliminating unwanted rotational and torsional forces that are normally transmitted to a fork's bushing and sealing surfaces. On traditional axle systems, these forces create excessive stiction and binding which can lead to diminished performance during aggressive riding. Precision machining is used to shave weight, maintain strength, and ensure specified tolerances. The preload adjusting nut, cam lever, and lock latch allow for simple adjustment and axle removal.

Air Volume Adjustment

Ramp it up and "huck to flat" or keep calm and ride along; the choice is in your hands. Or better yet the choice is in your Helm: with Cane Creek's indexed volume adjustment system. No "bottom-out" spacers or volume adjusting bands to keep track of. With an accessory free, 8-position static piston the Helm can be DIALED in to handle any trail and any rider.

Internal Travel Adjustment

The versatility of Cane Creek’s air spring does not end at the tuning process. Cane Creek’s engineers and product development team implemented pneumatic spring technology that allows riders to internally adjust the Helm's travel without the need to replace the air shaft assembly. Cane Creek Factory set the travel at 160 mm, but Helm Air forks are optimized for travel settings between 170 mm and 140 mm. The maximum reduction allows 100 mm travel. Two internal 10 mm travel adjustment spacers are included with every Helm.

Included in delivery: incl. QR15 D-Loc thru axle, ahead cap and star nut
Material: stanchions, steerer: aluminium
Weight supplement: manufacturer's specs
  • Description
  • Fact Sheet
  • Ratings (0)

Fact Sheet of Cane Creek Helm Air 29/27.5+ Inch Fork - 140mm - 44mm Offset - Tapered - 15x110mm Boost - gunmetal grey

Product Name: Cane Creek Helm Air 29/27.5+ Inch Fork - 140mm - 44mm Offset - Tapered - 15x110mm Boost - gunmetal grey
Manufacturer: Cane Creek
Item Code: CCR421720
activity: Bike
material: Aluminium
usage bikesport: MTB, Enduro, All-Mountain
brake type: Disc Brake
wheel size: 27,5" / 650B (584mm), 28" (29") (622mm)
travel fork: 140
axle standard: 15x110 Boost (FW)
air/coil spring: with air spring
fork/shock adjustability: Pressure positive air chamber, Pressure negative air chamber, Low speed compression, High speed compression, Low speed rebound, Lockout
fork length (axle to crown): 568mm
stanchion diameter: 35mm
suspension: air spring
damping: closed cartridge, Mono-Tube design
fork offset: 44mm
max tire width: 64mm
steerer diameter: 1 1/8"-1 1/2" tapered
disc brake mount: PM (6") 160mm, Postmount
steerer material: Aluminium
Model year: 2019
Color: Grey, Metallic
fork construction: classic
weight: 2080g
manufacturer item code: BAG0537
Manufacturer page:
  • Description
  • Fact Sheet
  • Ratings (0)


(0 Ratings)
Customer Reviews