DXC DP/TWO Dropper Post - Ø 31.6 mm - Travel 125 mm

As a further development of our DXC DP/ONE seatpost, the DP/TWO offers a significantly lower weight and two other features that its little sister does not have: the extension of the seatpost can be reduced by up to 25 mm in 5 mm increments (+RAD system). In addition, a valve on the head of the seat post allows the pressure (rebound) to be adjusted, as is familiar from suspension forks and shocks (air valve feature). Never before has it been so easy to adapt a seatpost to individual sensitivities or the terrain as with the DXC DP/TWO!

Apart from that, the DP/TWO naturally offers the same features: The hydraulically adjustable seat post has the option of installing a remote handlebar control, which allows the seat position to be easily and conveniently adjusted to the respective terrain without the need for tools. The reliable and robust technology offers simple and precise height adjustment with virtually no play, enabling a quick change of seat position. The saddle can be raised or lowered to any position within the adjustment range of the seat post.

Features of the DXC DP/TWO telescopic seat post

• made from 7075-T651 aluminum
• Weight approx. 516 g at 31.6/150 mm
• +RAD system for adjusting the stroke by up to -25 mm
• Air Valve System for adjusting the pressure via a valve (shock pump required)
• Simple saddle clamp attachment

Note: Handlebar remote, cable and cable holder are required to use the seat post. These are not included in the scope of delivery due to individual mounting variants. Please order separately

+RAD-System

The +RAD-System allows the extension to be limited by up to 25 mm. This means, for example, that a support with 200 mm travel can be limited to up to 175 mm travel. The adjustment takes place in steps of 5 mm and is possible without tools. The extension is limited using a small bushing inside the support. Make the adjustment as follows:

1. Lower the seat post by at least 35 mm.
2. Loosen the cover cap between the seat post body and the extendable part.
3. Pull out the bushing, reposition and reinsert.
4. Tighten the cover cap.
5. Extend the seat post completely.

Air Valve Feature

As with shocks and suspension forks, the pressure in the cartridge of the DP/TWO can also be individually adjusted. To do this, the saddle must be completely removed. The same applies to the saddle clamp. The adjustment is made using a damper pump (not included in the scope of delivery).

Changing the pressure affects the speed at which the seat post compresses and rebounds. The default setting is 280-300 psi (approx. 20 bar). 300 psi is the maximum pressure that must not be exceeded!

Scope of delivery:

• 1x DXC DP/TWO telescopic seat post