The FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams. Factory says it all - feature packed and designed to exceed the demands of riders. Factory series products feature slippery smooth, ultra-durable Genuine Kashima Coat.
The new crown design improves durability while it maintains stiffness & drops weight.
The patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, Firm) to adapt to varying trail conditions. Factory series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Additionally the low-speed rebound (10 clicks) can be adjusted.
Optimizes small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression
Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.
Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness.
The lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity-style riding.
|Product Name:||FOX 36 Float FIT4 Factory - 27.5" Suspension Fork - 160mm - Tapered - 15x110mm - 44mm Offset - black|
|usage bikesport:||MTB, All-Mountain, Trail|
|brake type:||Disc Brake|
|wheel size:||27,5" / 650B (584mm)|
|axle standard:||15x110mm Boost (FW)|
|air/coil spring:||Air spring|
|fork/shock adjustability:||Coil spring rate, Air volume, Low speed compression, Low speed rebound|
|Steerer tube Ø:||1 1/8"-1 1/2" tapered|
|disc brake mount:||PM (7") 180mm, Postmount|
|max. disc diameter:||230mm|
|fork construction:||Classic Suspension Fork|
|manufacturer item code:||910-21-123|