Loctite Threadlocker Typ 290 - 10ml
A medium strength wicking threadlocker for pre-assembled bolts up to 1/2" (12 mm). Penetrates threads by capillary action. Secures set screws and other assemblies after settings are completed. Seals welds and porous metal parts.
Features
- Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws
- Works on metal only
- Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
- Requires heat for disassembly
Technical Data
- Strength: Medium / High
- Breakaway torque M10 bolts: 10Nm
- Fixture time steel: 20 min.
- Fixture time brass: 20 min.
- Fixture time stainless steel: 60 min.
- Service temperature range: -55°C - +150°C
Hazard statement
DangerCauses serious eye irritation.
May cause respiratory irritation.
Ingredients
α,α-dimethylbenzyl hydroperoxide
Instructions for use
Use only in well-ventilated areas.
Avoid contact with eyes and skin, especially contact of length or frequency. Do not eat, drink, or smoke while using this product, and wash your hands afterward. Wipe up small spills with a paper towel; absorb larger spills with absorbent material.
Do not allow contact with strong acids or strong oxidizing agents.
Store in a well-ventilated area.
Do not allow to enter sewers, surface water, or groundwater.
Safety Instructions
If medical advice is needed, have the container or label at hand.
Keep out of the reach of kids.
Dispose of content/container in accordance with national regulations.
Avoid inhaling vapors.
If eye irritation persists: Seek medical advice or attention.
| Product Name: | Loctite Threadlocker Typ 290 - 10ml |
| Manufacturer: | Loctite |
| Item Code: | LOC198437 |
| activity: | Cycling |
| content: | 10ml |
| Model year: | 2026 |
| Adhesives: | Threadlocker |
| GTINs: | 142567, 4100630000084 |
| Manufacturer page: | http://www.loctite.de |
