Vittoria Mazza Trail TNT G2.0 Foldable Tire - 29x2.4"

 

Mazza Trail - For mixed terrain conditions

• Aggressive profile with ample sipe spacing for mixed terrain
• Progressive sipe width for tactile grip on rocks and roots
• Stepped leading edge center-tread maintains speed, and delivers climbing traction
• Trail TNT Tubeless Ready Casing with additional sidewall layer und Anti-Pinch-Flat (APF) inserts. Designed for delivering ultimate puncture protection on sidewalls

 

 

Details about Vittoria Mazza G2.0 MTB Tire

The new Vittoria Mazza combines years of athlete input with cutting edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning.

Cornering on the Mazza is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, but without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex, and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza’s generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky, while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life. The bar has been raised.

 

Vittoria Technologies

Graphene 2.0 (G2.0) Rubber Compound

GRAPHENE 2.0 (G 2.0) takes the original Graphene compound foundation that Vittoria built, and functionalizes the advancements in performance, for each specific application. In other words, where the first generation of graphene compounds raised the bar evenly, Graphene 2.0 pin-points each performance metric, and increases it disproportionally to the rest. Vittoria is now able to apply Graphene in such a way that it can achieve a performance boost specifically for speed, wet grip, durability, and puncture resistance.

4C - 4-Compounds in a single tire tread

Vittoria 4C compound layering technology features separate base and surface compounds, in both the center and the side areas of the tread. This approach enables the Vittoria team to fine-tune the flex of the tread-base and tread-surface separately, placing the correct durometer GRAPHENE 2.0 compound exactly where it is needed for maximum cornering, climbing, rolling, and braking performance. In addition, durability and puncture protection are also improved, as the robust base compound resists punctures, and provides a stable base for deeper mountain bike treads.

 

Vittoria TNT

With the TNT technology (Tube - NoTube) the tire features an additional sidewall layer and is suitable for tube or tubeless riding.

Note: Tubeless Ready tires require tubeless compatible rims/wheels, tubeless valves, tubeless rim tape and sealing fluid for tubeless mounting. Sealant fluid is not required for tubeless UST tires, but is recommended for increased puncture protection. Installation should only be carried out by qualified personnel.